Search results

This paper aims to propose a new sleep signal controlled footless domino circuit for reducing the subthreshold and gate oxide leakage currents.

In the proposed circuit, a P channel MOSFET (PMOS) sleep switch transistor is inserted between the power supply and the output node. The sleep transistor, the source of the pull-down network, and the source of the N channel MOSFET (NMOS) transistor of the output inverter are controlled by this additional sleep signal to place the footless domino circuit in a low leakage state.

The authors simulate the proposed circuit by using HSPICE in 45-nm CMOS technology for OR and AND logic gates such as OR2, OR4, OR8, AND2 and AND4 at 25°C and 110°C. The proposed circuit reduces leakage power consumption as compared to the existing circuits.

The proposed circuit significantly reduces the total leakage power consumption up to 99.41 and 99.51 per cent as compared to the standard dual-threshold voltage footless domino circuits at 25°C and 110°C, respectively, and up to 93.79 and 97.98 per cent as compared to the sleep control techniques at 25°C and 110°C, respectively. Similarly, the proposed circuit reduces the active power consumption up to 26.76 and 86.25 per cent as compared to the standard dual-threshold voltage and sleep control techniques footless domino circuits at 25°C and 110°C, respectively.

The existing literature reflects that the connection between enablers of Industry 4.0 (I4.0), Supply Chain (SC) sustainability and reliability is understudied. To cover this gap, the purpose of this study is to identify and benchmark the enablers of I4.0 for SC sustainability to build a Reliable Supply Chain (RSC).

This study benchmarks the I4.0 enablers for SC sustainability for building a RSC and analyses them with a multi-method approach. The identified potential enablers are validated empirically. A multi-method approach of Analytical Hierarchy Process (AHP), Decision Making Trial and Evaluation Laboratory (DEMATEL) and Preference Ranking for Organization Method for Enrichment Evaluation (PROMETHEE-II) was used to investigate the influence of the identified benchmarking enablers and develop an interrelationship diagram among the identified enablers.

This study benchmarks the potential enablers of I4.0 to achieve high ecological-economic-social gains in SCs considering the Indian scenario. Digitalization of the supply chain, decentralization, smart factory technologies and data security and handling are the most prominent enablers of I4.0 for SC sustainability to build a RSC.

The findings from the study may benefit managers, practitioners, specialists, researchers and policymakers interested in I4.0 sustainability applications.

This paper aims to propose a new lector-based domino and examine it with inputs and clock signal combination in a 45-nm dual-threshold footerless domino circuit for reduced leakage current.

In this technique, p-type and n-type leakage control transistors (LCTs) are introduced between pull-up and pull-down networks, and the gate of one is controlled by the source of the other. A high-threshold transistor is used in the input for reducing gate oxide leakage current, which becomes dominant in nanometre technology. Simulations were based on a 45-nm BISM 4 model using an HSPICE simulator for proposed domino circuits.

The result shows that CHIL (clock high and input low) state is ineffective for lowering leakage current and the conventional CHIH (clock high and input high) state is only effective to suppress the leakage at low temperature for wide fan-in domino circuits. At high temperature, CLIL (clock low and input low) state is preferable to reduce the leakage current for low fan-in domino, but for high fan-in domino, CHIH state is preferred. The proposed circuit technique for AND2, OR2, OR4 and OR8 circuits reduces the active power consumption by 50.94 to 75.68 per cent and by 64.85 to 86.57 per cent at low and high die temperatures, respectively, when compared to the standard dual-threshold voltage domino logic circuits.

The research proposes a new leakage reduction technique used in domino circuits and also evaluates the state for leakage reduction which can be used for low-power dynamic circuits.

Leadership can cultivate shared understandings of goals within organizations. Transformational leaders engage in vision-sharing, whereas transactional leaders apply contingent rewards and sanctions. To set the stage for better performing organizations, public managers could lead in ways to improve the communication that flows internally in public organizations, defined as the internal communication performance. Previous studies have linked transformational leadership with internal communication performance in public organizations, but no studies have considered the broader array of leadership strategies and their combination. The purpose of this study is to assess the strength of the relationship between different forms of leadership (transformational and transactional) and internal communication.

The study is based on a balanced panel dataset of 751 employees.

The analysis corroborates the existing findings of a relationship between transformational and internal communication, and it identifies a relationship between transactional leadership through verbal rewards and internal communication.

In so doing, the study brings new insights to our understanding of how leaders in public organizations can improve the internal communication in their organizations, which has been linked to, among others, how employees themselves perceive the red tape and performance within public organizations.

The purpose of this paper is to review the various pre-processing and post-processing approaches used to ameliorate the surface characteristics of fused deposition modelling (FDM)-based acrylonitrile butadiene styrene (ABS) prototypes. FDM being simple and versatile additive manufacturing technique has a calibre to comply with present need of tailor-made and cost-effective products with low cycle time. But the poor surface finish and dimensional accuracy are the primary hurdles ahead the implementation of FDM for rapid casting and tooling applications.

The consequences and scope of FDM pre-processing and post-processing parameters have been studied independently. The comprehensive study includes dominance, limitations, validity and reach of various techniques embraced to improve surface characteristics of ABS parts. The replicas of hip implant are fabricated by maintaining the optimum pre-processing parameters as reviewed, and a case study has been executed to evaluate the capability of vapour smoothing process to enhance surface finish.

The pre-processing techniques are quite deficient when different geometries are required to be manufactured within limited time and required range of surface finish and accuracy. The post-processing techniques of surface finishing, being effective disturbs the dimensional stability and mechanical strength of parts thus incapacitates them for specific applications. The major challenge for FDM is the development of precise, automatic and controlled mass finishing techniques with low cost and time.

The research assessed the feasibility of vapour smoothing technique for surface finishing which can make consistent castings of customized implants at low cost and shorter lead times.

The extensive research regarding surface finish and dimensional accuracy of FDM parts has been collected, and inferences made by study have been used to fabricate replicas to further examine advanced finishing technique of vapour smoothing.

The purpose of this paper is to implement coating system by varying the amount of nano-sized titanium dioxide, (nano-TiO₂) combined with various organic binders and to study the coating effects on the performance of solar cell in terms of temperature and efficiency.

Nano-TiO₂ coatings are developed in two types of binder networks; the combination of methyltrimethoxy silane (MTMS) and nitric acid and the combination of 3-aminopropyl triethoxysilane (APTES) and MTMS. Overall, the formulations method was cost-effective, produces good transparency, clear and managed to dry at room temperature. The coating mixtures were applied onto the glass substrate by using the dip-coating method and the coated substrate were sent for several characterizations.

This study demonstrated that TiO₂ nanoparticle coating in APTES/MTMS matrix showed a thermal-decreasing result on solar cells, where the cell temperature is reduced to 46.81°C (T₂ coating type) from 55.74°C (without coating) after 1-h exposure under 1,000 W/m² irradiance in a solar simulator. Contrary to prior works where solar cell coatings were reported to reduce the cell temperature at the expense of the cell efficiency, the results from this study reported an improved fill factor (FF) of solar cells. From the photovoltaic (PV) characteristics study, the FF for solar cells is increased by approximately 0.2, i.e. 33.3 per cent, for all coatings compared to the non-coated cell.

Findings will be able to contribute in the development of temperature-reducing and efficiency-enhancing coating for PV panels.

A simple dip-coating method provides an even distribution of TiO₂ nanoparticle coating on the glass panel, which is cost-effective and time-efficient to reduce the temperature of solar cell while maintaining its efficiency.

The ability of nano-TiO₂ coatings with a simple fabrication method and the right solution to reduce the surface temperature of solar cells while improving the FF of the cells.

This paper aims to fabricate a polymer-based polyethylene glycol (PEG) coating with acrylic resin as a binder that can show antiviral activity against the feline coronavirus (FCov) on the glass substrate.

The PEG/acrylic coating systems of different weight percentages were coated on the glass substrates using the spray-coating method and cured at room temperature for 24 h.

The coating system containing 20 Wt.% of PEG exhibits the highest antiviral activities as high as 99.9% against FCov compared with other samples.

Findings will be useful in the development of antiviral coating for PPE fabrics by using the simple synthesis method.

Application of PEG as an antiviral agent in the antiviral coating system with high antiviral activities about 99.9%.

The purpose of this paper is to address the combined effects of thermal radiation and chemical reaction on steady MHD mixed convective heat and mass transfer flow past a vertical surface under the influence of Joule and viscous dissipation.

The governing system of partial differential equations is transformed to dimensionless equations using dimensionless variables. The dimensionless equations are then solved analytically using perturbation technique.

With the help of graphs, the effects of the various important parameters entering into the problem on the dimensionless velocity, dimensionless temperature and dimensionless concentration fields within the boundary layer are discussed. The authors noticed that the velocity increases with an increase in the porosity parameter. An increase in the Prandtl number Pr, decreases the velocity and the temperature field. An increase in the radiation parameter, decreases the velocity and the temperature field. Also the effects of the pertinent parameters on the skin-friction coefficient and rates of heat and mass transfer in terms of the Nusselt and Sherwood numbers are presented numerically in tabular form.

To the best of the authors’ knowledge, recent this work has not been finished by any other researchers.

The paper aims to investigate the effect of Degussa P-25 Titanium Dioxide (TiO₂) nanoparticles on hydrophobicity and self-cleaning ability as a single organic coating on glass substrate.

Two methods have been used to enhance the hydrophobicity on glass substrates, namely, surface modification by using low surface energy isooctyltrimethoxysilane (ITMS) solution and construction of rough surface morphology using Degussa P-25 TiO₂ nanoparticles with simple bottom-up approach. The prepared sol was applied onto glass substrate using dip-coating technique and stoved in the vacuum furnace 350°C.

The ITMS coating with nano TiO₂ pigment has modified the glass substrate surface by achieving the water contact angle as high as 169° ± 2° and low sliding angle of 0° with simple and low-cost operation. The solid and air phase interface has created excellent anti-dirt and self-cleaning properties against dilute ketchup solution, mud and silicon powder.

Findings will be useful in the development of self-cleaning and anti-dirt coating for photovoltaic panels.

Sol method provides the suitable medium for the combination of organic–inorganic network to achieve high superhydrophobicity and optimum self-cleaning ability.

Application of blended organic–inorganic sol as self-cleaning and anti-dirt coating film.