Search results

The boundary-layer analysis is required to reveal the fluid flow behavior in several industrial processes and enhance the products’ effectiveness. Therefore, this research aims to investigate the buoyancy or mixed convective stagnation-point flow (SPF) and heat transfer of a micropolar fluid filled with hybrid nanoparticles over a vertical plate. The nanoparticles silver (Ag) and titanium dioxide (TiO₂) are scattered into various base fluids to form a new-fangled class of (Ag-TiO₂/various base fluid) hybrid nanofluid along with different shape factors.

The self-similarity transformations are used to reformulate the leading requisite partial differential equations into renovated non-linear dimensionless ordinary differential equations. The numerical dual solutions are gained for the transmuted requisite equations with the help of the bvp4c built-in package in MATLAB software. The results are validated by comparing them with previously available published data for a particular case of the present study.

The impact of various pertaining parameters such as nanoparticle volume fraction, material parameter, shape factor and mixed convective on temperature, heat transfer, fluid motion, micro-rotation and drag force are visualized and scrutinized through tables and graphs. It is observed that dual or non-uniqueness outcomes are found for the case of buoyancy assisting flow, whereas the solution is unique in the buoyancy opposing flow case. Additionally, the fluid motion and micro-rotation profiles decelerate in the presence of nanoparticle volume fraction, while the temperature augments.

The mixed convective stagnation point flow conveying TiO₂/Ag hybrid nanofluid with micropolar fluid with various shape factors is the significant originality of the current investigation where multiple outcomes are obtained for the assisting flow. The various base fluids such as glycerin, water and water–ethylene glycol (50%:50%) are considered in the present problem. The bifurcation values of the considered problem do not exist, probably because of various base fluids. To the best of the authors’ knowledge, this work is new and original which were not previously reported.

This study aims to investigate the micropolar fluid flow through a moving flat plate containing CoFe₂O₄-TiO₂ hybrid nanoparticles with the substantial influence of thermophoresis particle deposition and viscous dissipation.

The partial differential equations are converted to the similarity equations of a particular form through the similarity variables. Numerical outcomes are computed by applying the built-in program bvp4c in MATLAB. The process of flow, heat and mass transfers phenomena are examined for several physical aspects such as the hybrid nanoparticles, micropolar parameter, the thermophoresis particle deposition and the viscous dissipation.

The friction factor, heat and mass transfer rates are higher with an increment of 1.4%, 2.2% and 1.4%, respectively, in the presence of the hybrid nanoparticles (with 2% volume fraction). However, they are declined because of the rise of the micropolar parameter. The imposition of viscous dissipation reduces the heat transfer rate, significantly. Meanwhile, thermophoresis particle deposition boosts the mass transfer. Multiple solutions are developed for a certain range of physical parameters. Lastly, the first solution is shown to be stable and reliable physically.

As far as the authors have concerned, no work on thermophoresis particle deposition of hybrid nanoparticles on micropolar flow through a moving flat plate with viscous dissipation effect has been reported in the literature. Most importantly, this current study reported the stability analysis of the non-unique solutions and, therefore, fills the gap of the study and contributes to new outcomes in this particular problem.

Nanofluid research has piqued the interest of scientists due to its intriguing applications in nanoscience, biomedical and electrical engineering, medication delivery, biotechnology, food processing, chemotherapy and other fields. This paper aims to inspect the behavior of the mixed convection magnetohydrodynamic flow and heat transfer induced by a nonlinear stretching/shrinking sheet in a nanofluid with a convective boundary condition. Tiwari and Das mathematical nanofluid model is incorporated in the analysis.

The mathematical model is initially transformed to a nondimensional form by using dimensionless variables. Then the nondimensional partial differential equations are further transformed to a set of similarity equations by using the similarity technique. These equations are solved numerically by the bvp4c function in MATLAB software.

For a certain range of the stretching/shrinking parameter, two solutions are obtained. The friction factor and the heat transfer rate escalate due to suction parameter with adding nanoparticles volume fraction by almost 27.15% and 0.153% for the upper branch solution, while the friction factor declines by almost 30.10% but the heat transfer rate augments by 0.145% for the lower branch solution. Furthermore, the behavior of the nanoparticle volume fractions on the heat transfer rate behaves differently in the presence of the mixed convection effect. The temperature of fluid augments with increasing Biot number for both solutions.

The present work considers the flow and heat transfer induced by a stretching/shrinking sheet in a nanofluid using the Tiwari–Das nanofluid model with a convective boundary condition, where the effect of the buoyancy force is taken into consideration. It is shown that two solutions are found for a certain range of the shrinking strength, while the solution is unique for the stretching case. This study is important for scientists working in the growing field of nanofluids to become familiar with the flow properties and behaviors of such nanofluids.

This study aims to investigate the flow and heat transfer of a hybrid nanofluid through an exponentially stretching/shrinking sheet along with mixed convection and Joule heating. The nanoparticles alumina (Al₂O₃) and copper (Cu) are suspended into a base fluid (water) to form a new kind of hybrid nanofluid (Al₂O₃-Cu/water). Also, the effects of constant mixed convection parameter and Joule heating are considered.

The governing partial differential equations are transformed into ordinary differential equations (ODEs) using appropriate similarity transformations. The transformed nonlinear ODEs are solves using the bvp4c solver available in MATLAB software. A comparison of the present results shows a good agreement with the published results.

Dual solutions for hybrid nanofluid flow obtained for a specific range of the stretching/shrinking parameter values. The values of the skin friction coefficient increases but the local Nusselt number decreases for the first solution with the increasing of the magnetic parameter. Enhancing copper volume fraction and Eckert number reduces the surface temperature, which intimates the decrement of heat transfer rate for the first and second solutions for the stretching/shrinking sheet. In detail, the first solution results show that when the Eckert number increases as 0.1, 0.4 and 0.7 at λ = 1.5, the temperature variations reduced to 10.686840, 10.671419 and 10.655996. While in the second solution, keeping the same parameters temperature variation reduced to 9.750777, 9.557349 and 9.364489, respectively. On the other hand, the results indicate that the skin friction coefficient increases with copper volume fraction. This study shows that the thermal boundary layer thickness rises due to the rise in the solid volume fraction. It is also observed that the magnetic parameter, copper volume fraction and Eckert number widen the range of the stretching/shrinking parameter for which the solution exists.

In practice, the investigation on the flow and heat transfer of a hybrid nanofluid past an exponentially stretching/shrinking sheet with mixed convection and Joule heating is crucial and useful. The problems related to hybrid nanofluid have numerous real-life and industrial applications, such as microelectronics, manufacturing, naval structures, nuclear system cooling, biomedical and drug reduction.

In specific, this study focuses on increasing thermal conductivity using a hybrid nanofluid mathematical model. The novelty of this study is the use of natural mixed convection and Joule heating in a hybrid nanofluid. This paper can obtain dual solutions. The authors declare that this study is new, and there is no previous published work similar to the present study.

This study aims to investigate the flow impinging on a stagnation point of a shrinking cylinder subjected to prescribed surface heat flux in Al₂O₃-Cu/water hybrid nanofluid.

Using similarity variables, the similarity equations are obtained and then solved using bvp4c in MATLAB. The effects of several physical parameters on the skin friction and heat transfer rate, as well as the velocity and temperature profiles are analysed and discussed.

The outcomes show that dual solutions are possible for the shrinking case, in the range λc<λ<−1, where λc is the bifurcation point of the solutions. Meanwhile, the solution is unique for λ≥−1. Besides, the boundary layer is detached on the surface at λc, where the value of λc is affected by the hybrid nanoparticle φhnf and the curvature parameter γ. Moreover, the friction and the heat transfer on the surface increase with the rising values φhnf and γ. Finally, the temporal stability analysis shows that the first solution is stable in the long run, whereas the second solution is not.

The present work considers the problem of stagnation point flow impinging on a shrinking cylinder containing Al₂O₃-Cu/water hybrid nanofluid, with prescribed surface heat flux. This paper shows that two solutions are obtained for the shrinking case. Further analysis shows that only one of the solutions is stable as time evolves.

This paper aims to investigate the radiation and magnetohydrodynamic effect on the flow toward a stagnation point of an exponentially shrinking sheet in a hybrid nanofluid.

The governing partial differential equations are transformed into a set of similarity equations and are then solved numerically using the boundary value problem solver, bvp4c, available in MATLAB software. The effects of several physical parameters on the flow and the thermal characteristics of the hybrid nanofluid are analyzed and discussed.

Numerical results clarify that the dual solutions arise for the shrinking case (λ < 0). The critical values expand for the stronger magnetic field. Besides, the skin friction and the heat transfer coefficients enhance with the rise of the magnetic field and the hybrid nanoparticles. The heat transfer rate increases by 10.11% for the nanofluid and 28.69% for the hybrid nanofluid compared to the regular fluid. In addition, the presence of radiation gives a higher heat transfer rate. Using the stability analysis, it is found that the first solution is stable, and the second solution is unstable, over time.

The stagnation point flow problem has been widely studied for the flow over a stretching sheet, but only limited findings can be found for the flow over a shrinking sheet. Therefore, the present study considers the problem of the stagnation point flow over a shrinking sheet in a Cu-Al₂O₃/water hybrid nanofluid with the effects of magnetic field and thermal radiation. The dual solutions of the hybrid nanofluid flow over a shrinking sheet are obtained. Further analysis shows that only one of the solutions is stable and thus physically reliable as time evolves.

This paper aims to examine the hybrid nanofluid flow towards a stagnation point on an exponentially stretching/shrinking vertical sheet with buoyancy effects.

Here, the authors consider copper (Cu) and alumina (Al₂O₃) as hybrid nanoparticles while water as the base fluid. The governing equations are reduced to the similarity equations using similarity transformations. The resulting equations are programmed in Matlab software through the bvp4c solver to obtain their solutions.

The authors found that the heat transfer rate is greater for Al₂O₃-Cu/water hybrid nanofluid if compared to Cu/water nanofluid. Besides, the non-uniqueness of the solutions is observed for certain physical parameters. The authors also notice that the bifurcation of the solutions occurs in the downward buoyant force and the shrinking regions. In addition, the first solution of the skin friction and heat transfer coefficients increase with the added hybrid nanoparticles and the mixed convection parameter. The temporal stability analysis shows that one of the solutions is stable as time evolves.

The present work is dealing with the problem of a mixed convection flow of a hybrid nanofluid towards a stagnation point on an exponentially stretching/shrinking vertical sheet, with the buoyancy effects is taken into consideration. The authors show that two solutions are obtained for a single value of parameter for both stretching and shrinking cases, as well as for both buoyancy aiding and opposing flows. A temporal stability analysis then shows that only one of the solutions is stable and physically reliable as time evolves.

Ferrofluids are aqueous or non-aqueous solutions with colloidal particles of iron oxide nanoparticles with high magnetic characteristics. Their magnetic characteristics enable them to be controlled and manipulated when ferrofluids are exposed to magnetic fields. This study aims to inspect the features of unsteady stagnation point flow (SPF) and heat flux from the surface by incorporating ferromagnetic particles through a special kind of second-grade fluid (SGF) across a movable sheet with a nonlinear heat source/sink and magnetic field effect. The mass suction/injection and stretching/shrinking boundary conditions are also inspected to calculate the fine points of the features of multiple solutions.

The leading equations that govern the ferrofluid flow are reduced to a group of ordinary differential equations by applying similarity variables. The converted equations are numerically solved through the bvp4c solver. Afterward, study and discussion are carried out to examine the different physical parameters of the characteristics of nanofluid flow and thermal properties.

Multiple solutions are revealed to happen for situations of unsteadiness, shrinking as well as stretching sheets. Greater suction slows the separation of the boundary layers and causes the critical values to expand. The region where the multiple solutions appear is observed to expand with increasing values of the magnetic, non-Newtonian and suction parameters. Moreover, the fluid velocity significantly uplifts while the temperature declines due to the suction parameter.

The novelty of the work is to deliberate the impact of mass suction/injection on the unsteady SPF through the special second-grade ferrofluids across a movable sheet with an erratic heat source/sink. The confirmed results provide a very good consistency with the accepted papers. Previous studies have not yet fully explored the entire analysis of the proposed model.

A novel type of heat transfer fluid known as hybrid nanofluids is used to improve the efficiency of heat exchangers. It is observed from literature evidence that hybrid nanofluids outperform single nanofluids in terms of thermal performance. This study aims to address the stagnation point flow induced by Williamson hybrid nanofluids across a vertical plate. This fluid is drenched under the influence of mixed convection in a Darcy–Forchheimer porous medium with heat source/sink and entropy generation.

By applying the proper similarity transformation, the partial differential equations that represent the leading model of the flow problem are reduced to ordinary differential equations. For the boundary value problem of the fourth-order code (bvp4c), a built-in MATLAB finite difference code is used to tackle the flow problem and carry out the dual numerical solutions.

The shear stress decreases, but the rate of heat transfer increases because of their greater influence on the permeability parameter and Weissenberg number for both solutions. The ability of hybrid nanofluids to strengthen heat transfer with the incorporation of a porous medium is demonstrated in this study.

The findings may be highly beneficial in raising the energy efficiency of thermal systems.

The originality of the research lies in the investigation of the Darcy–Forchheimer stagnation point flow of a Williamson hybrid nanofluid across a vertical plate, considering buoyancy forces, which introduces another layer of complexity to the flow problem. This aspect has not been extensively studied before. The results are verified and offer a very favorable balance with the acknowledged papers.

This paper aims to examine the Cu-Al2O3/water hybrid nanofluid flow over a shrinking sheet in the presence of the magnetic field and dust particles.

The governing partial differential equations for the two-phase flow of the hybrid nanofluid and the dust particles are reduced to ordinary differential equations using a similarity transformation. Then, these equations are solved using bvp4c in MATLAB software. The bvp4c solver is a finite-difference code that implements the three-stage Lobatto IIIa formula. The numerical results are gained for several values of the physical parameters. The effects of these parameters on the flow and the thermal characteristics of the hybrid nanofluid and the dust particles are analyzed and discussed. Later, the temporal stability analysis is used to determine the stability of the dual solutions obtained as time evolves.

The outcome shows that the flow is unlikely to exist unless satisfactory suction strength is imposed on the shrinking sheet. Besides, the heat transfer rate on the shrinking sheet decreases with the increase of . However, the increase in and lead to enhance the heat transfer rate. Two solutions are found, where the domain of the solutions is expanded with the rising of, and. Consequently, the boundary layer separation on the surface is delayed in the presence of these parameters. Implementing the temporal stability analysis, it is found that only one of the solutions is stable as time evolves.

The dusty fluid problem has been widely studied for the flow over a stretching sheet, but only limited findings can be found for the shrinking counterpart. Therefore, this study considers the problem of the dusty fluid flow over a shrinking sheet containing Cu-Al₂O₃/water hybrid nanofluid with the effect of the magnetic field. In fact, this is the first study to discover the dual solutions of the dusty hybrid nanofluid flow over a shrinking sheet. Also, further analysis shows that only one of the solutions is stable as time evolves.