Search results

The purpose of this study is to present the state of the art for fiber Bragg grating (FBG) acceleration sensing technologies from two aspects: the principle of the measurement dimension and the principle of the sensing configuration. Some commercial sensors have also been introduced and future work in this field has also been discussed. This paper could provide an important reference for the research community.

This review is to present the state of the art for FBG acceleration sensing technologies from two aspects: the principle of the measurement dimension (one-dimension and multi-dimension) and the principle of the sensing configuration (beam type, radial vibration type, axial vibration type and other composite structures).

The current research on developing FBG acceleration sensors is mainly focused on the sensing method, the construction and design of the elastic structure and the design of a new information detection method. This paper hypothesizes that in the future, the following research trends will be strengthened: common single-mode fiber grating of the low cost and high utilization rate; high sensitivity and strength special fiber grating; multi-core fiber grating for measuring single-parameter multi-dimensional information or multi-parameter information; demodulating equipment of low cost, small volume and high sampling frequency.

The principle of the measurement dimension and principle of the sensing configuration for FBG acceleration sensors have been introduced, which could provide an important reference for the research community.

This paper aims to provide feasible countermeasures for the application of lean manufacturing in automatic sand casting workshops to optimize production line balance.

A production line balance optimization model for sand casting workshops is proposed. The value stream mapping (VSM) approach is applied to diagnose the problems in the production process. An optimization scheme is established based on eliminate, combine, rearrange, simplify and increase theory and Kanban management method. Further, simulation is done to compare current VSM and future VSM.

After implementing the proposed model, findings indicated that the idle time of equipment was effectively reduced, the line of balance of the production line was increased by 44.7%, the production lead time was shortened by 60.3% and the production capacity was increased by 50.0%.

Application of the optimization model in this study is limited to sand casting workshops that have realized automatic or semi-automatic production.

This paper provides an optimization model for the implementation of lean manufacturing in sand casting workshops and provides a reference case that reflects the actual application of lean manufacturing tools in a real situation.

Lead users are essential participants in crowdsourcing innovation events; their continuance intention significantly affects the success of the crowdsourcing innovation community (CIC). Although researchers have acknowledged the influences of network externalities on users' sustained participation in general information systems, limited work has been conducted to probe these relationships in the CIC context; particularly, the predictors of lead users' continued usage intention in such context are still unclear. Hence, this paper aims to explore the precursors of lead users' continuance intention from a network externalities perspective in CIC.

This work ranked users' leading-edge status to recognize lead users in the CIC. And then, the authors proposed a research model based on the network externalities theory, which was examined utilizing the partial least squares (PLS) technique. The research data were collected from an online survey of lead users (n = 229) of a CIC hosted by a China handset manufacturer.

Results revealed that the number of peers, perceived complementarity and perceived compatibility significantly influence lead users' continuance intention through identification and perceived usefulness.

This work contributes to the crowdsourcing innovation research and provides views regarding how lead users' sustained participation can be developed in the CICs. This work also offers an alternative theoretical framework for further research on users' continued intention in open innovation activities.

Online social networks are increasingly important venues for businesses to promote their products and image. However, information propagation in online social networks is significantly more complicated compared to traditional transmission media such as newspaper, radio, and television. In this chapter, we will discuss research on modeling and forecasting diffusion of virally marketed content in social networks. Important aspects include the content and its presentation, the network topology, and transmission dynamics. Theoretical models, algorithms, and case studies of viral marketing will be explored.

Prior studies on the impact of incentives on physicians’ online participation mainly focused on different incentives while ignoring the difficulty of setting monetary incentives efficiently. Based on goal-setting theory, the current research examines the relationship between incentives with goals of varying difficulty and professional health knowledge sharing (PHKS) in online health knowledge-sharing platforms (OHKSPs).

Four field experiments with different monetary incentives were conducted by one of China’s largest OHKSPs, with whom the researchers cooperated in data collection. Monthly panel data on 10,584 physicians were collected from September 2018 to December 2019. There were 9,376 physicians in the treatment group and 1,208 in the control group. The authors used a difference-in-difference (DID) model to explore the research question based on the same control group and the Chow test with seemingly unrelated estimation (sureg) to compare regression coefficients between four groups. Several robustness checks were performed to validate the main results, including a relative time model, multiple falsification tests and a DID estimation using the propensity score matching method.

The results show that the monetary incentive significantly positively affected the volume of physicians’ PHKS directly with negative spillover to the duration of physicians’ PHKS. Moreover, the positive effect of incentives with higher difficulty on the volume of physicians’ PHKS was significantly smaller than that of incentives with low difficulty. Finally, professional title had a positive moderating effect on the volume of goal difficulty setting and did not significantly moderate the effect on the duration of physicians’ PHKS.

Some limitations of this study are: firstly, because the field experiments were enterprise benefit oriented, the treatment and control groups were not balanced. Secondly, the experiments for different incentive measures were relatively similar, making it challenging to validate a causal effect. Finally, more consideration should be given to the strategy for setting hierarchical incentives in future research.

The research indicates that monetary incentives have a bilateral effect on PHKS, i.e. a positive direct effect on the volume of physicians’ contributions and a negative spillover effect on the duration of physicians’ PHKS. The professional titles of physicians also moderate such bilateral switches of PHKS. Furthermore, when a physician’s energy is limited, the goal difficulty setting of the incentive mechanism tends to be low. The more difficult the incentives are, the more inefficient the effects on physicians’ PHKS will be.

Prior researches on the adoption of mobile health services (MHS) concentrate on the subjective cognitive appraisals resulting in technology adoption, while ignoring how to shape those cognitive appraisals by the objective message design strategies which are easier to operate in practice. Based on protection motivation theory (PMT), the current research aims to explore the antecedents of cognitive appraisals by focusing on message design strategies of fear appeal and coping appeal.

A two-stage scenario-based survey of 204 participants was conducted to collect data. The authors chose SPSS and covariance-based structural equation modeling (CB-SEM) approach with the software LISREL 8.8 to test our model.

The results show that the relationship between fear appeal and fear arousal is inverted U-shaped such that the degree of fear arousal is the greatest when the fear appeal is at a moderate level. Perceived usefulness for the message with negative framing is higher than that with positive framing. Furthermore, fear appeal and coping appeal have a significant interaction on the adoption of MHS at different stages.

The sample data of this study come from a special health service of a special group in China, which limits the universality of our research results for other groups or health care services. Therefore, future researchers can validate the model in other research scenarios and sample populations.

This study shows how fear appeal and coping appeal work together to influence individuals' adoption intention. The authors’ findings expand the theoretical depth of PMT and fear theory, enriching the theoretical connotation of framing effect in mobile health technology adoption context, which add new insights to design more persuasive messages through fear appeal and coping appeal for researchers and MHS providers in mobile health communication or propaganda.

With the advent of the Digital 2.0 era, online doctor–patient (D–P) interaction has become increasingly popular. However, due to the fact that doctors use their fragmented time to serve patients, online D–P interaction inevitably has some problems, such as the lack of pertinence in the reply content and doctors' relative unfamiliarity with their individual patients. Therefore, the purpose of this study is to excavate whether potential D–P social ties and D–P knowledge ties accentuate or attenuate the influence of patient selection (online and offline selection).

The authors used the methods of text mining and empirical analysis on the structured and unstructured data of an online consultation platform in China to examine the research hypotheses.

The findings illustrate that the potential D–P social ties increase the influence on patient selection, as do the potential D–P knowledge ties. Specifically, the effect of social ties on patient selection is positively moderated by patient health literacy. Conversely, health literacy weakens the link between knowledge ties and patient selection. In addition, the doctor's title weakens the influence of social ties on patient selection, in contrast to knowledge ties (partially).

This study provides guidance for doctors and patients on how to communicate effectively and alleviate tension within D–P relationships. The study’s findings have both theoretical and practical implications for both doctors' and online platforms' decision-making.

This chapter examines China’s corporate governance and accounting environment that shapes the adoption of internationally acceptable principles and standards. Specifically, it examines international influences, including supranational organizations; foreign investors and international accounting firms; domestic institutional influences, including the political system, economic system, legal system, and cultural system; and accounting infrastructure. China’s convergence is driven by desired efficiency of the corporate sector and legitimacy of participating in the global market. Influenced heavily by international forces in the context of globalization, corporate governance and accounting practices are increasingly becoming in line with internationally acceptable standards and codes. While convergence assists China in obtaining legitimacy, improving efficiency is likely to be adversely affected given that corporate governance and accounting in China operate in an environment that differs considerably from those of Anglo-American countries. An examination of the corporate governance and accounting environment in China suggests heavy government involvement within underdeveloped institutions. While the Chinese government has made impressive progress in developing the corporate governance and accounting environment for the market economy, China’s unique institutional setting is likely to affect how the imported concepts are interpreted and implemented.

The serious friction and wear problem occurs on the mechanical seal’s faces during the start-up stage of the high-speed turbopump for a liquid rocket engine. This paper aims to propose a kind of thick metal alloy coatings on the surface of the seal’s rotor so as reduce the friction and wear.

With the pin-disk (the graphite pin and the disk with the metal coating) tribology-tester, the tribological behaviors of four metal coatings are investigated. The special friction coefficients under the dry friction, boundary friction and different temperatures of water-lubricated conditions were obtained.

The test results show that the thick metal coating has a good performance of the wear resistance and friction reduction; and the friction coefficients of a Sn-Sb-Cu coating under the dry friction and water-lubricated conditions are 0.377 and 0.043, respectively, and the corresponding mass wear volumes are only 2.74 and 0.81 mg, respectively.

The thick metal coating scheme for the mechanical seal’s faces might lend itself to the harsh working conditions of the low-viscosity liquid rocket engine.