Search results

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the UK, particularly in London, there has been very little published research into the analysis of benefits and disbenefits to both buses and non-priority vehicles at pre-signalised intersections. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals.

The aim of the article was to focus on various peptides identified in the egg and their probable application as novel ingredients in the development of functional food products. Bioactive peptides of egg origin have attracted increasing interest as one of the prominent candidates for development of various health-promoting functional and designer foods.

Traditionally known as a source of highly valuable proteins in human nutrition, eggs are nowadays also considered as an important source of many bioactive peptides which may find wide application in medicine and food production. These specific protein fragments from egg proteins which, above and beyond their nutritional capabilities, have a positive impact on the body’s function or condition by affecting the digestive, endocrine, cardiovascular, immune and nervous systems, and may ultimately influence health.

Several peptides that are released in vitro or in vivo from egg proteins have been attributed to different health effects, including antihypertensive effects, antimicrobial properties, antioxidant activities, anticancer activity, immunomodulating activity, antiadhesive properties and enhancement of nutrient absorption and/or bioavailability. Extensive research has been undertaken to identify and characterize these biologically active peptides of egg origin which has changed the image of egg as a new source of biologically active ingredients for the development of functional foods with specific benefits for human health and treatment and prevention of diseases.

The paper mainly describes the above-stated properties of bioactive peptides derived from egg proteins.

In this manuscript, we aimed to (1) illustrate the differences in school–university partnership under the school reform and renewal models and (2) describe the practice of and learning about school–university partnership by reflecting on the three large, federally funded projects, all conducted under the school renewal model.

We used archival data from the three large, federally funded projects, synthesized our research related to school–university partnerships and developed themes for actions and learnings related to the topic of school–university partnerships.

The school–university partnerships under the school renewal model are different from that under the school reform model. School–university partnership under the school renewal model is associated with positive results for schools and the university. There are clear themes for the actions and learning in the school–university partnership under the school renewal model.

It is original to study school–university partnerships in the context of the school renewal model.

Tourism is a labor-intensive sector with extensive links to other industries and plays a vital role in creating employment. This study aims to propose a new framework to analyze the intrinsic structure of the employment effects of tourism-related sectors and their drivers.

This study uses input–output and structural decomposition analysis (IO-SDA) to quantify the employment effects of tourism-related sectors and their driving mechanisms based on China’s I-O tables of 2002, 2007, 2012 and 2017.

The results show a declining trend in the intensity of direct or indirect employment effects in tourism-related sectors, indicating a decreasing number of jobs directly or indirectly required to create a unit of tourism output. Among tourism-related sectors, catering has the highest intensity of indirect employment effects over the study period. Catering stimulates the indirect employment of agriculture, forestry, animal husbandry, fishery and food and tobacco manufacturing. The decomposition analysis reveals that final demand is the largest contributor to the increase in tourism employment, while technological progress shifts from an employment-creation effect in 2002–2012 to an employment-destruction effect in 2012–2017.

This study proposes a new analytical framework to investigate the structural proportional relationship between the direct and indirect employment effects of various tourism-related sectors and their dynamic changes. Doing so, it provides valuable references for policymakers to promote tourism employment.

旅游相关部门就业效应的驱动因素：以中国为例

摘要

旅游业是一个劳动密集型部门, 与其他国民经济部门有着广泛的联系, 这在创造就业方面发挥着重要作用。本研究旨在建立一个框架, 分析旅游相关部门就业效应的内在结构及其驱动因素。

本研究基于中国2002年、2007年、2012年和2017年的投入产出表, 引入投入产出和结构分解分析（IO-SDA）法量化了旅游相关行业的就业效应及其变化的驱动机制。

旅游相关部门的直接或间接就业强度呈下降趋势, 可见创造一个单位的旅游产出所需的直接或间接工作数量在减少。在旅游相关部门中, 餐饮部门在研究期内的间接就业效应强度最高, 主要带动了农、林、牧、渔业和食品及烟草制造业的间接就业。旅游就业效应变动的驱动因素中, 最终需求是旅游就业效应增加的最大贡献者, 技术效应从2002-2012年期间的就业创造效应转变为2012-2017年期间的就业破坏效应。

本研究建立了一个全新的分析框架, 可以揭示各个旅游相关部门的直接和间接就业效应之间的结构比例关系及其动态变化。对旅游就业效应的驱动因素分析可以为政策制定者提供针对性的建议, 以促进旅游就业。

Factores que impulsan los efectos del empleo en los sectores relacionados con el turismo: El caso de China continental

Resumen

El turismo es un sector intensivo en mano de obra con amplios vínculos con otras industrias y desempeña un papel vital en la creación de empleo. Este estudio propone un nuevo marco para analizar la estructura intrínseca de los efectos en el empleo de los sectores relacionados con el turismo y sus impulsores.

Este estudio utiliza el análisis de entrada-salida (input-output) y de descomposición estructural (structural decomposition) (IO-SDA) para cuantificar los efectos sobre el empleo en los sectores relacionados con el turismo y sus mecanismos impulsores, basándose en las tablas input-output de China de 2002, 2007, 2012 y 2017.

Los resultados muestran una tendencia a la baja en la intensidad de los efectos directos o indirectos del empleo en los sectores relacionados con el turismo, lo que indica un número cada vez menor de puestos de trabajo directos o indirectos necesarios para crear una unidad de producción turística. Entre los sectores relacionados con el turismo, la restauración tiene la mayor intensidad de efectos indirectos sobre el empleo durante el periodo de estudio. La restauración estimula el empleo indirecto de la agricultura, la silvicultura, la ganadería, la pesca y la fabricación de alimentos y tabaco. El análisis de descomposición revela que la demanda final es la que más contribuye al aumento del empleo turístico, mientras que el progreso tecnológico pasa de ser un efecto de creación de empleo en 2002-2012 a un efecto de destrucción de empleo en 2012-2017.

Este estudio propone un nuevo marco analítico para investigar la relación estructural proporcional entre los efectos directos e indirectos del empleo de varios sectores relacionados con el turismo y sus cambios dinámicos. De este modo, proporciona valiosas referencias para que los responsables políticos promuevan el empleo en el sector turístico.

This paper aims to propose two parallel two-step finite element algorithms based on fully overlapping domain decomposition for solving the 2D/3D time-dependent natural convection problem.

The first-order implicit Euler formula and second-order Crank–Nicolson formula are used to time discretization respectively. Each processor of the algorithms computes a stabilized solution in its own global composite mesh in parallel. These algorithms compute a nonlinear system for the velocity, pressure and temperature based on a lower-order element pair (P₁b-P₁-P₁) and solve a linear approximation based on a higher-order element pair (P₂-P₁-P₂) on the same mesh, which shows that the new algorithms have the same convergence rate as the two-step finite element methods. What is more, the stability analysis of the proposed algorithms is derived. Finally, numerical experiments are presented to demonstrate the efficacy and accuracy of the proposed algorithms.

Finally, numerical experiments are presented to demonstrate the efficacy and accuracy of the proposed algorithms.

The novel parallel two-step algorithms for incompressible natural convection problem are proposed. The rigorous analysis of the stability is given for the proposed parallel two-step algorithms. Extensive 2D/3D numerical tests demonstrate that the parallel two-step algorithms can deal with the incompressible natural convection problem for high Rayleigh number well.

This paper aims to proposes and analyzes a novel recovery-based posteriori error estimator for the stationary natural-convection problem based on penalized finite element method.

The optimal error estimates of the penalty FEM are established by using the lower-order finite element pair P₁-P₀-P₁ which does not satisfy the discrete inf-sup condition. Besides, a new recovery type posteriori estimator in view of the gradient recovery and superconvergent theory to deal with the discontinuity of the gradient of numerical solution.

The stability, accuracy and efficiency of the proposed method are confirmed by several numerical investigations.

The provided reliability and efficiency analysis is shown that the true error can be effectively bounded by the recovery-based error estimator.

The cost-oriented robotic assembly line balancing problem (cRALBP) has practical importance in real-life manufacturing scenarios. However, only a few studies tackle the cRALBP using exact methods or metaheuristics. This paper aims to propose a hybrid particle swarm optimization (PSO) combined with dynamic programming (DPPSO) to solve cRALBP type-I.

Two different encoding schemes are presented for comparison. In the frequently used Scheme 1, a full encoding of task permutations and robot allocations is adopted, and a relatively large search space is generated. DPSO1 and DPSO2 with the full encoding scheme are developed. To reduce the search space and concern promising solution regions, in Scheme 2, only task permutations are encoded, and DP is used to obtain the optimal robot sequence for a given task permutation in a polynomial time. DPPSO is proposed.

A set of instances is generated, and the numerical experiments indicate that DPPSO achieves a tradeoff between solution quality and computation time and outperforms existing algorithms in solution quality.

The contributions of this paper are three aspects. First, two different schemes of encoding are presented, and three PSO algorithms are developed for the purpose of comparison. Second, a novel updating mechanism of discrete PSO is adjusted to generate feasible task permutations for cRALBP. Finally, a set of instances is generated based on two cost parameters, then the performances of algorithms are systematically compared.

The purpose of this paper is to investigate the thermal fatigue behavior of a single Sn-3.0Ag-0.5Cu (SAC) lead-free and 63Sn-37Pb (SnPb) solder joint treated by rapidly alternating heating and cooling cycles.

With the application of electromagnetic-induced heating, the specimen was heated and cooled, controlled with a system that uses a fuzzy logic algorithm. The microstructure and morphology of the interface between the solder ball and Cu substrate was observed using scanning electron microscopy. The intermetallic compounds and the solder bump surface were analyzed by energy-dispersive X-ray spectroscopy and X-ray diffraction, respectively.

The experimental results showed that rapid thermal cycling had an evident influence on the surface and interfacial microstructure of a single solder joint. The experiment revealed that microcracks originate and propagate on the superficial oxide of the solder bump after rapid thermal cycling.

Analysis, based on finite element modeling and metal thermal fatigue mechanism, determined that the rimous cracks can be explained by the heat deformation theory and the function of temperature distribution in materials physics.

The purpose of this paper is to explore the influence mechanism of job satisfaction and positive affect on knowledge sharing among project members in Chinese construction industry, and test the moderating role of organizational commitment between them in order to find a new approach from the perspective of psychology to improve the knowledge sharing performance within project management organizations in China constantly.

An empirical study was used based on confirmatory factor analysis and hierarchical regression analysis with a sample of 540 project members from 80 project management organizations in China.

Research results showed that job satisfaction and positive affect of project members both have a significant positive impact on knowledge sharing; organizational commitment could moderate the influence of job satisfaction and positive affect on knowledge sharing among project members partially within the Chinese context.

A questionnaire study from China only represents the relationship and regular pattern within a shorter time interval in the Chinese context. It is necessary to continue to implement a longitudinal study in a relatively long period in future research.

Knowledge sharing among project members can be enhanced through improving job satisfaction and positive affect, and strengthening project members’ organizational commitment can amplify the influence effect of job satisfaction and positive affect on knowledge sharing.

This paper clarifies the direct influence mechanism of project members’ job satisfaction and positive affect on explicit knowledge sharing (EKS) and tacit knowledge sharing (TKS), and further tests the partial moderating effect of organizational commitment on the influence relationship of job satisfaction and positive affect on EKS and TKS.

Herringbone groove thrust bearings are typically used in high-speed, light-load applications, such as spindle motors for hard disk drives. In the past researches, the effect of shaft misalignment was little considered. This study aims to reveal effects of shaft misalignment on the microscopic flow regime in the water-lubricated herringbone groove thrust bearing.

The liquid film in a thrust herringbone groove bearing was investigated by computational fluid dynamics. The effects of micro-grooves on the flow field were carefully explored. Two-dimensional liquid films at four different sites were examined for obtaining the rich flow field properties.

The distributions of pressure, temperature and water vapor volume fraction were obtained, the micro hydrodynamic effects were formed by the herringbone grooves and the effects of the shaft misalignment on lubrication and sealing performance could be found.

The influence of misalignment on the herringbone groove thrust bearing performance was investigated in detail. The obtained results could give the reference guideline for the bearing design.