Search results

Fabrics, which are one of the raw materials of the clothing industry, constitute approximately 40–45% of the total cost of an apparel product. Due to the labor-intensive nature of this industry and failure to apply scientific methods along with the manufacturing processes, the wastes in the raw materials, including fabrics, become higher. Besides, quality deficiencies are encountered due to the same reasons. This study aims to determine the optimum total fabric layer height based on the fabric type during the cutting process with a straight knife cutting machine, which provided a decrease in the cutting errors.

Frequently used fabric types in an enterprise operating in organic cotton knitwear were listed. During the cutting tests, the straight knife cutting machine was used as the cutting device. The weight and thickness values of the fabrics were obtained to provide a comparison basis. Two different algorithms were created to evaluate the defective pieces according to fabric type, cutting height and error placement. Cutting resistances of these fabrics were also determined to evaluate the defect reasons. In the end, optimum total fabric layer count and total cutting height suggestions were proposed for each fabric type for a minimum cutting error.

At the end of this study, the error-free layers were identified per fabric type. At the same time, the optimum cutting height was suggested for each fabric basis. For 40/1 single jersey fabrics, the cutting height should be between 2.10 cm and 10.40 cm; for 30/1 single jersey fabrics, between 1.65 cm and 5.70 cm; for 20/1 single jersey fabrics, between 1.83 cm and 6.70 cm; for two-thread fleece fabrics, between 2.13 cm and 4.70 cm; and for three-thread fleece fabrics, between 0 cm and 4.90 cm.

Within the scope of the study, since the products made of knitted fabric were produced more frequently and in large quantities, the study was carried out with 15 different types of knitted fabrics at 10 different layers. The same methods should be applied for woven, denim and nonwoven fabric types, which would shed light on the following studies.

Due to scarce research carried out on the cutting procedure of the clothing industry in regards to sustainability, this study aims to contribute to this area. The main difference between this study and the studies that mostly make mathematical predictions about the cutting procedure is that it is practice-oriented.

The purpose of this paper is to comparatively examine the personnel working in the clothing sector by examining them in three different methods in order to determine the working postures, identification of the stress factors of musculoskeletal system and the exposures depending on the working postures. Methods used in the study, REBA (Hignett and McAtamney, 2000), Ovako Working Posture Analyzing System (OWAS) (Karhu et al., 1977) and PLIBEL (Kemmlert, 1995) are the scientific observation-based methods. Within the scope of this study, the working stations and the working postures of the operators who work in the clothing sector were examined and their movements that could cause harm to the body were examined and in conclusion some suggestions were suggested to prevent these movements.

Due to the standard unit of times in clothing sector are short and the work done is very repetitive, 30 min recording was thought as enough for each operator examined. These recorded videos were then divided into 30 s photographs to obtain the poses of the operators’ working postures. In the scope of the research, first, the PLIBEL observation form was filled as the PLIBEL method is more general one. According to the working postures, the body regions which are damaged or can be damaged were identified and the PLIBEL form was filled in the consideration of the risk factors in the form (Malchaire 2011). In addition, the photographs were also analyzed with REBA and OWAS methods for having more quantitative and detailed results.

The working postures of the operators who work in the cutting, sewing, ironing, quality control and packaging departments of six clothing companies were examined in the scope of this research with PLIBEL, REBA and OWAS methods in terms of ergonomy. The results belonging to each department were given separately. REBA and OWAS methods have been applied in order to investigate the working postures in more detail due to the lack of providing numerical data of the PLIBEL method. The reliability of the study has been approved with obtaining the similar results from the REBA and OWAS methods. According to Table VIII, both of the methods show that all the departments in question need ergonomic arrangements. It was analyzed that the cutting department is in the first place which needs ergonomic arrangement immediately (REBA %90.58, OWAS %87.69).

This study is composed of 65 operators who have experience between 5 and 22 years and in the age range of 22–43 working in the cutting, sewing, ironing, quality control and packaging departments in eight different clothing companies. These 65 operators were recorded by video camera during their work. The recording time were selected randomly. The movements of operators during their own work have been taken into consideration.

This paper indicates the usability of the PLIBEL, OWAS and REBA methods in clothing sector. Using these methods in clothing sectors states the value and the originality of this paper.

This research uses the experience economy theory and tourism experiences to explore how different types of experiences in theme parks influence visitors' experiential satisfaction and behavioral intention.

The data were collected from visitors of different nationalities at a theme park hotel. The R program and JASP were used to analyze the data of the multinational sampling. JASP was used for the structural equation modeling (SEM) and the R program for the analysis of the measurement invariance.

The results highlight the existence of different visitor behavior in the experience economy, tourism experience and experiential satisfaction among visitors of several nationalities. However, the results highlight the existence of common visitor behavior on behavioral intention among visitors of these nationalities. This study reveals that visitors of different nationalities can have both diverse experiential and cultural motivations.

The results show that managers should apply a plan and strategy according to the differences between the nationalities. By examining visitors from different nationalities, the study was allowed to be interpreted from a wider perspective in terms of academia and industry.

This study makes a difference in the literature in terms of focusing on cross-national differences by examining the experiences of visitors from different nationalities by using experience economy theory and tourism experience elements in the same research model.

The purpose of this paper is to evaluate the specific reasons for the Turkish women in the Turkish Republic of Northern Cyprus not reaching the same level of achievement in the political sphere as their male counterparts. The aim is to draw attention to the extremely low participation of women in politics (6 per cent) and suggest possible solutions to increase it.

The study consists of interviews with seven women who played an active role in politics and who are still in the political arena as parliamentarians or ministers.

It was found that the major political problem of the island, “the Cyprus problem”, has had a significant impact on the confinement of women in the private sphere. In addition, the divided land constitutes a higher restriction on women. Moreover, gatherings in coffeehouses and the time of such meetings are important difficulties. Furthermore, the women's branches of the political parties constitute a serious barrier.

The study focuses on a part of a small island, Cyprus. Therefore, it was possible to interview only seven women politicians.

This paper is functional and interesting for those working with gender equality, particularly the obstacles that women face and their secondary role in the political arena.

This paper provides new empirical data on gender equity in the context of the Turkish Cypriots and critically analyzes the specific situation of women politicians living on the island.

The paper aims to describe a new national system for resource sharing and document supply in Turkey.

The paper takes a historical and descriptive approach.

KITS has been very successful in linking academic and other institutions in Turkey to an effective and efficient system of document supply. This is illustrated by figures provided on its expansion in the last two years.

The paper is useful for all librarians concerned with national document supply systems, especially in the developing world.

This is the first published review of the national system that is transforming document supply in Turkey, and it deals frankly with the obstacles that KITS faces, at the same time indicating the ways in which success has been achieved.

In addition to their effects on economic growth, prolonged terrorist activities can reduce government revenue. Apart from the destruction of physical infrastructure and human capital, terrorism also has lagged-effect on investment, which ultimately dampens the fiscal position and further affects the economic growth. This chapter is devoted to the discussion on the interaction between terrorism, growth, and fiscal variables in Nigeria using real per capita income, government revenue, government expenditure and defense expenditure. The findings show that terrorism is associated with low economic growth which has the potency to reduce government expenditure. It was also observed that government expenditure can be improved by fostering government revenue. In view of this, apart from domestic efforts, interventions of international communities are further needed to reduce the drastic effects of terrorism, especially in meeting and improving expenditure on growth-enhancing sectors.

Since 2004, Turkish cinema has been witnessing an emergence of horror genre, now flooded with stories of possession by malevolent jinn, as transgressive, volatile figures of abjection. These female-centred narratives rely both on Islamic cosmology and myths and folktales of pre-Islamic Anatolian oral culture. The chapter will first explore the reasons horror has been neglected in the century-long history of cinema in Turkey and move on to highlight the socio-economic, cultural, and political contexts that were catalysts for the horror genre’s emergence. Then, the chapter will discuss the codes and conventions of the genre and explore the unique place of Alper Mestçi’s 2007 film Haunted (Musallat), among its contemporaries in terms of the ways in which the film challenges these established codes and conventions. In analysing Haunted, the chapter will use the theoretical framework of Barbara Creed, Carol J. Clover and Julia Kristeva to discuss the monstrous-feminine and masculinity as abjection.

Building on previous historical works, this study aims to develop a framework to represent chambers as meta-organizations and present the case of Dersaadet Chamber of Commerce (DCC), based on this framework, during its emergence and evolution in the late 19th and early 20th centuries.

In the study, a historical narrative was constructed from primary and secondary data. To complement data collected from the archives a systematic content analysis was used to explore the discourse of the chamber within its serial magazine.

It was found that the first chamber of the Ottoman Empire, DCC, was established according to the public law model as an extension of the economic context and the guild order, and it was observed that it increasingly conformed to this model between 1882 and 1929.

In this study, chamber models are examined for the first time according to the designated features of meta-organizational forms, built on the historical work on chambers. The case of DCC suggested that it adopted a public law model and displayed much continuity, even when significant transitions were observed during the modernization process from Ottoman Empire to Turkish Republic.