Search results

The aim of this paper is twofold. The main objective is to contribute to a more comprehensive understanding of the tensions that characterize social enterprises because of their dual (economic and social) commitments in a Hungarian context.

The research was exploratory, as no structured inquiry has been carried out in a Hungarian context concerning the sources of tension social enterprises encounter because of their dual commitments. Therefore, a qualitative approach was chosen to achieve the exploratory goal. Semi-structured in-depth interviews were carried out with one expert and nine social entrepreneurs to map and understand these tensions in a Hungarian context.

The research provides a comprehensive three-level model of tensions in which concrete (observable) tensions are grouped into 4 main groups of tensions and 15 subgroups.

This study is original in two ways. First, besides the numerous tensions other researchers have already observed, this study revealed some that have not been empirically observed. Second, being the first research on tensions in a Hungarian context, to the best of the authors’ knowledge, the results increase understanding of social entrepreneurship in a Hungarian context based on the lived experiences of Hungarian social entrepreneurs.

Effectively solving the large tonnage cable in the construction process due to the tensioning method of the inclined cable often appears in the overall cable force and the design value of the deviation is large, cable internal strand force is not uniform, the main girder stress exceeds the limit of the problem affecting the safety of the structure.

In this study, the finite element method and theoretical analysis method are utilized to propose a construction control method of tensioning the whole bunch of diagonal cables in two parts according to the deformation coordination relationship between the main girder and the diagonal cables. This methodology was implemented during the actual construction of the PAIRA Bridge in Bangladesh.

Tests conducted on cable-stayed bridges using this controlled tensioning method demonstrate that the measured cable strength of a single strand exhibits an error of less than 0.15% compared to the design target cable strength. The deviation between the measured and designed cable forces ranges from 0.16% to 0.27%. Furthermore, no tensile stress is observed in both the top plate and bottom plate of the root section of the main girder, indicating a state of full-section compression throughout the entire construction process.

Through the comparison with the test value, it can be proved that the whole bunch of diagonal cable tensioned in two parts of the construction control method proposed in this paper can make the internal strand force more uniform, to meet the precision requirements of the site construction, to protect the safety of the bridge construction process. The method proposed in this paper is highly accurate, easy to calculate, and has a high value of popularization and application.

The integration of industry 4.0 has become a priority for many organizations. However, not all organizations are suitable and capable of implementing industry 4.0 because it requires a dynamic and flexible implementation strategy. The implementation of industry 4.0 often involves overcoming several tensions between internal and external stakeholders. This paper aims to explore the paradoxical tensions that arise for health-care organizations when integrating industry 4.0. Moreover, it discusses how a paradox lens can support the conceptualization and proposes techniques for handling tensions during the integration of industry 4.0.

This qualitative and in-depth study draws upon 32 semi-structured interviews. The empirical case concerns how two health-care organizations handle paradoxical tensions during the integration of industry 4.0.

The exploration resulted in six recurring technology tensions: technology invention (modularized design vs. flexible design), technology collaboration (automation vs. human augmentation), technology-driven patient experience (control vs. autonomy), technology uncertainty (short-term experimentation vs. long-term planning), technology invention and diffusion through collaborative efforts among stakeholders (selective vs. intensive collaboration) and technological innovation (market maintenance vs. disruption).

A paradox theory-informed conceptual model is proposed for how to handle tensions during the integration of industry 4.0. To the best of the authors’ knowledge, this is the first paper to introduce paradox theory for quality management, including lean and Six Sigma.

Designing and developing responsible business practices can create various tensions for service organizations. The purpose of this research is to develop a deeper understanding of the relationship between customer engagement (CE) and responsible business practices (e.g. environmental, social and/or governance [ESG], corporate social responsibility [CSR] and diversity, equity, and inclusion [DEI]) and explore customer engagement tensions that service organizations may face.

This research develops a list of CE-related responsible business practice tensions and empirically explores their relevance through in-depth interviews with nine ESG professionals.

This paper makes three important contributions. First, we find support for nine distinct but related tensions with implications for CE that organizations must navigate when pursuing responsible business practices. Second, interview participants provide some suggestions for tackling these tensions, which we support with relevant theories. Finally, we develop a conceptual framework that may stimulate future service research and inform the implementation of ESG strategies.

To the best of the authors’ knowledge, this research is the first to conceptualize and empirically explore the tensions that emerge between responsible business practices and CE. The authors develop a novel analysis of the CE-related tensions that emerge when pursuing an ESG strategy.

The findings are based on a small sample of ESG professionals. Future research may take a quantitative approach to further evaluate the role that these tensions play in engaging customers.

This research provides a conceptual framework that may guide ESG professionals in understanding, framing and navigating CE-related tensions when pursuing responsible business practices.

A social benefit may be found when service organizations are better able to successfully navigate CE-related tensions when pursuing responsible business practices.

The purpose of this paper is to investigate warp and weft crimp distribution over the fabric width and how it is influenced by warp tension distribution over the warp width.

An experimental design in this research includes air jet loom, tension sensor, inductive sensor and personal computer.

It is found that warp crimp in the fabric on the loom is higher in the edge zones than the middle of the fabric and warp crimp in the middle is higher than warp crimp in edge zones of the grey fabric. Weft crimp in the edge zones is higher than in the middle of the grey fabric. The reason behind warp tension and warp and weft crimp variations over fabric width is that weft yarn slips towards inside fabric at selvedges and gets relaxed during beat up.

It is proved that reducing weft yarn slip and therefore weft yarn relaxation during beat up will reduce warp tension and warp and weft crimp variations and improve the uniformity of fabric properties over the fabric width.

The perfect interlacing of needle and bobbin thread in the stitch formation process and seam appearance depends first of all on correct pre‐tension of the tension regulator. Changes in the pre‐tension settings also have a direct influence on the tensile force during the sewing process. This contribution presents the influence of pre‐tension in a defined area on the tensile force in important phases of the stitch formation process. In addition the influence of the stitch velocity on tensile force was investigated. On the basis of statistic analysis it was ascertained in which pre‐tension area and stitch velocity the significant differences between tensile forces occurred.

A study of thread tensions on a lockstitch sewing machine was made, measuring simultaneously both the needle and bobbin thread tensions. Experiments were carried out under specified sewing conditions, whereby needle and bobbin thread tensioner adjustment, sewing speed, number of plies, fabric quality and sewing thread quality were varied in order to investigate the effect of these factors on the needle and bobbin thread tensions. The patterns of the thread tension traces obtained were analysed as well as the effect of these factors on the peak tensions detected on both thread tension traces. Four significant peak tensions on the needle thread tension trace and two significant peak tensions on the bobbin thread tension trace were detected, during a stitch cycle. It was found that no significant variations occurred as far as the timing and shape of the peak tensions were concerned. However, variations were detected in the peak tensions according to the sewing conditions, as expected. From the analysis of the data obtained, multiple regression equations were derived to predict, with a good degree of accuracy, the peak tensions generated, according to the sewing conditions.

The prevention of fatigue in bolts by controlled pre‐tensioning is investigated theoretically. It is shown that the effect of pre‐tension is to reduce the alternating load in the bolt and that the stiffness of the fitting plays an important part in this reduction. Fatigue tests on ¾‐in. B.S.F. bolts with various amounts of pre‐tension show how this reduction in alternating load can prevent fatigue failure. A warning is given against relying on the benefits of pre‐tensioning without ensuring that pre‐tension is maintained in service.

Formulators must control coating transfer and adhesion by developing formulations that perform well under widely varying application speeds and operating conditions. There are factors that can be controlled, and others that cannot be controlled. It is especially useful, and often essential, for the formulator to have an understanding of the principles and relationships of surface and interfacial tension, and surface energy or “wetting tension”. A review of these important principals and relationships, with a brief introduction to formulation variables sets the stage for introduction of an instrument that can easily measure the surface tension of coatings and the wetting tension of the surfaces or “substrates” to be coated.

The tension variations across the width of the weaver's beam cause uneven tension in the fabric formation zone. As a result of the tension variation, the woven fabric tends to have fabric defects, such as non-uniform fabric density and differential dye take–up at various places on the fabric. As the warp ends are continuously subjected to varying tensions, warp breakage frequently occurs. As a result, the quality of the fabric produced suffers and there is reduced loom efficiency. However, uniformity in the fabric density is crucial, especially for technical and smart textiles. In this paper, the authors have attempted to model the varyingtensions across different segments of a warp sheet under a set of assumptions and derived a linear model. Furthermore, a prototype of an automatic tension control device is instrumentedwith two different positions which are located one meter apart and allows the tension variations across the warp-sheet to be practically observed. The measured average tension shows that variations in the internal tension on different segments of the warp-sheet can be minimized or even completely eliminated over time. With the implementation of a related experiment, the authors have shown the effectiveness of this automatic tension controller and its strong implications for the industry.